Skip to product information
1 of 1

Walker Ceramics

Walker Ceramics Sealers Cove Brush on Glaze EXM6287 1180-1280°C

Walker Ceramics Sealers Cove Brush on Glaze EXM6287 1180-1280°C

Regular price $27.90 AUD
Regular price Sale price $27.90 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

Firing Range: 1180-1280°C

Product Code: EXM6287

Sealers Cove is a grey and soft green satin matte glaze with tan breaks on the rims and edges or where it is thinner. The higher in firing, around 1250°C, degrees this glaze develops with green and grey crystals appearing.

Food Safe - No Lead frit is used in the manufacture of this product.

Keep lid tightly closed during storage and if thickening occurs add a small amount of water.

BRUSHING GLAZE IS PREPARED READY TO USE

Prior to glazing

Bisque fire the ware to its recommended temperature (minimum 1000°C). Sponge bisque with a damp sponge to remove any dust which may have collected. On narrow necked pieces where a sponge cannot work, use a clean damp brush. Do not eat, drink or smoke whilst handing your work as any grease transferred to the bisque will resist glaze. Although it may appear to cover grease spots when applied, glaze may crawl away when fired.

Application of Brushing Glaze

Once the container of liquid glaze has been shaken and stirred, load your glaze brush by immersing the hair up to the ferrule. Remove the glaze from one side of the brush and apply the fully loaded side to the bisque. As an approximate guide, a fully loaded brush will go about 80 mm before it should be re-loaded. Apply one even coat, let the "wet" look disappear, then apply a second coat in the opposite direction. When the second coat has lost its "wet" look, apply a third coat in the same direction as the first.

Australian Made

View full details