Kiln Controllers
KCR32C
The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.
Features
- 32 programs - each with up to 32 segments.
- Each segment is a controlled heating/cooling ramp soak.
- Suitable for glass or ceramics use.
- Soak times up to nearly 100 hours.
- Ramp rates from 1 to 999°C/hour full.
- Program Pause & Segment Advance facilities.
- Keyboard lockable.
- Delayed start facility - up to 4 days.
- Power failure recovery.
- Energy used display.
- Event / Damper / Fan relay output.
- Alarm relay with alarm buzzer.
- Mains power switch.
- Built in the United Kingdom.
KCR32CWIFI
The KCR32CWIFi is internally the same as the KCR32C but has the capability to be accessed and controlled remotely from your mobile device.This is one of the most important advances in Kilncare kilns for many years.Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
The KCR32WIFI is a genuine game changer and can be fitted to ANY of the Kilncare range of kilns.
Features
- 32 programs - each with up to 32 segments.
- Each segment is a controlled heating/cooling ramp soak.
- Suitable for glass or ceramics use.
- Soak times up to nearly 100 hours.
- Ramp rates from 1 to 999°C/hour full.
- Program Pause & Segment Advance facilities.
- Keyboard lockable.
- Delayed start facility - up to 4 days.
- WIFI mobile access capability KCR32CWIFI.
- Internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
- Power failure recovery.
- Energy used display.
- Event / Damper / Fan relay output.
- Alarm relay with alarm buzzer.
- Built in the United Kingdom.
KCR32ZWIFI
The KCR32ZWIFI is a multi-zone controller designed for use on our larger kilns where total eveness of chamber temperature is much more difficult to maintain through simple kiln design alone. The controller monitors one section of the kiln and adjust the other sections to maintain perfect chamber uniformity with regards to temperature.
This multi-program controller is designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32ZWIFI, down to 0,1c per hour, makes it the perfect controller for complicated glass cycles.
The KCR32ZWIFI has the capability to be accessed and controlled remotely from your mobile device.This is one of the most important advances in Kilncare kilns for many years.Using Kilncare's GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32ZWIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
Features
- Multi-zone control.
- 32 programs - each with up to 32 segments.
- Each segment is a controlled heating/cooling ramp soak.
- Suitable for glass or ceramics use.
- Soak times up to nearly 100 hours.
- Ramp rates from 0.1 to 999°C/hour full.
- Program Pause & Segment Advance facilities.
- Keypad lockable.
- Delayed start - up to 4 days.
- Internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
- USB facility for fault logging and program loading.
- Power failure recovery.
- Energy used display.
- Event / Damper / Fan relay output.
- Alarm relay with alarm buzzer.
- Mains power switch.
- Built in the United Kingdom.
The Kilncare GATEway
The driving force behind the KCR32ZWIFI is the Kilncare GATEway which is the online access tool to the controller.
Once registered for the GATEway you have a host of invaluable tools to use with your KCR32ZWIFI without actually being with the controller.... or even in the same country.
The tools include
- See the kilns temperature and status real time.
- Review the program that the kiln is firing at the time.
- View all programs installed into the controller.
- Create and name new programs and send them into the controller.
- View all programs in graph form.
- Stop the kiln if required.
- Monitor for kiln fault alerts.
- Monitor and use multiple kilns and KCR32ZWIFI controllers from the one registration.
- Name each kiln and controller.
Real time status of the kiln as it fires
View all programs in easy to read graph form
Keep a library on all of your firings on multiple kilns
Your Kiln Guide: Jump to Topic
Still need help?
If you have any questions, need help choosing your kiln, accessories or are looking at fitting out a studio please get in touch using the form below or email us directly at